Dip Tube - 1.5 Inch Tri Clover x 1.5 inch Tri Clover x .5 inch Tube

Tri Clover - Dip Tube - 1.5” TC x 1.5” TC x .5” Tube

Average rating:
average rating 100%
(9)
Tri Clover Dip Tube - 1.5" TC x 1.5" TC x .5" diameter tube. CUT TO YOUR EXACT SPECIFICATIONS.
$32.99
SKU 2363
Specify size:
If modifying length or height, please specify custom size:
Qty

Tri Clover Dip Tube

1.5” TC x 1.5” TC x 0.5” OD Tube

304 Stainless Steel

 

CHARACTERISTICS and SPECIFICATIONS:

·         304 Stainless Steel

·         Heavy duty, extra-thick tube is .5” outer diameter. Resists dents and bending.

·         1.5” tri-clover connection on outside edge of tube

·         1.5” tri-clover connection on middle section of tube

·         Length between outer edges of facing tri-clover fittings is 1-5/8”

·         Standard tube length from center 1.5” tri-clover face to back of 90 degree bend is 3”

·         Standard tube height from back of 90 degree bend to end of tube is 3-5/8”

·         Over-all length is 4-5/8”.

·         All measurements are targeted to within 1/16”

Specify custom length or height through pull-down menus (round UP to nearest half inch) and enter exact size desired in the text box area in the shopping cart screen

Average rating:
average rating 100%
9 reviews

Featured positive reviews:

average rating 100%
Another Perfect Custom Build. 07/20/2016
By Blayne Cannon
This one was ordered as a custom build for use in a custom built tun. Really good quality (grade and thickness of the stainless) and the welding is impeccable! The length and depth of the tube were exactly spot on to match the dimensions I provided of the ports and their locations installed in the tun by another vendor. Manufacture and delivery timeframe, again, was quick as well. The configuration was part of the whirlpool setup and works perfectly now. Sizing of these is a match for the standard 1.5" port, seal well, and are a breeze to use and clean (main reason I switched to Tri-clover). Again, if I need additional custom welding done in the future I will definitely be back. Thanks a million!
average rating 100%
Great quality! 08/13/2022
By Phil
Used this to upgrade the pathetic dip tubes that came with my SS Brewtech 1bbl chronicals.
The included dip tubes are way too short and even with a trub dump prior to transfer, were causing headaches.

These dip tubes worked like a charm as a retrofit and have made transfers go much smoother.
average rating 100%
Awesome piece 04/18/2018
By Michael A Palanza
Diptube works awesome, this is an easy solution to make your kettle or keggle into a working whirlpool. Get all you can out of your boil without drawing in the trub at the bottom.
 

Other items you might want to order:

Jaybird Tri Clover Tri Clamp 1.5 inch threaded filp-out hand bolt
Tri Clover - Clamp - 1.5”
$7.99
Qty
Average rating:
average rating 100%
1676_Tri_Clover_Gasket_1.5_Inch_Silicone.jpg
Tri Clover - Gasket - 1.5” - Silicone
$1.79
Qty
Average rating:
average rating 100%
1677_Tri_Clover_1.5_Inch_x_.5_Inch_Barbed.jpg
Tri Clover - 1.5” x 1/2” Barb
$11.99
Qty
Average rating:
average rating 100%
1235_Tri-Clover_1.5-Inch_Cap.jpg
Tri Clover - Cap - 1.5”
$3.99
Qty
Average rating:
average rating 100%
Pin It Bookmark and Share