BrewBuilt BE858 Beer Brewing 30 Gallon HLT for Homebrew
BrewBuilt BE858 Beer Brewing 30 Gallon HLT for Homebrew
BrewBuilt BE858 Beer Brewing 30 Gallon HLT Inside
BrewBuilt BE858 Beer Brewing 30 Gallon HLT Lid Gasket

Hot Liquor Tank - BrewBuilt 30 Gallon

gray stars
30 gallon (120 quart) BrewBuilt Hot Liquor Tank with lid, plug, thermometer and ball valve
SKU 3326

30 Gallon (120 Quart) BrewBuilt Hot Liquor Tank

Heavy Duty, 304 Stainless Steel

With Notched Lid, Gasket, Maximizer Dip Tube, Thermometer and Ball Valve

Designed for beer brewing. Built to Last! This 30 gallon (120 quart) Brewbuilt HLT (part number BE858) is made from 304 stainless steel and offers an unparalleled mix of features for the price.

Kettle Features:

Two welded-in-place couplers offer a lifetime of leak-free use. Welding in a coupler costs more than punching a hole and using a gasket (ie weldless) fitting. Welded fittings offer a permanent connection that is worth every penny.

Kettle includes a notched lid with silicone plug. This notch allows TONS of flexibility; you can use an immersion chiller, a sparge arm for mashing, tie off hop bags, take a temp reading during cooling, or whatever else you can dream up.

This kettle boasts internal volume markers from the bottom to the top - very handy for instant reads.

Silicone sleeved handles on the kettle and lid protect your hands.

Tri-clad bottom with 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner.

The bottom coupler has 1/2" male threads on the outside and 1/2'' female threads on the inside. You can easily install a pick up tube, stainless quick disconnects, a kettle screen, or any other fitting that features 1/2" NPT Male threads.

304 grade, 1.2mm thick stainless steel means less corrosion issues than with a kettle made from lower grade 201 type stainless. This kettle has been corrosive salt water tested, and it passed with flying colors. The rivets and riveted handles are stainless steel for a long term, trouble free life.

The included ball valve is a two piece design that allows for easy cleaning and is also made from 304 stainless steel.

This brewing kettle features a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil.

HLT Features:

Includes Maximizer dip tube and BrewBuilt BiMetal thermometer by TelTru.

Features List at a Glance

  • Two welded couplers for a lifetime of leak free use
  • Notched lid with silicone plug for flexibility
  • 304 Stainless construction for longevity
  • 1.2mm thick side wall resists denting
  • 4mm Tri-Clad Aluminum bottom sandwiched between two layers of stainless steel to prevent scorching
  • 1/2" NPT Female internal threads for attaching various kettle fittings
  • Internally etched volume markers from top to bottom for easy reading
  • Silicone coated handles for heat protection
  • 1.2:1 Ratio is optimal for boiling evaporation rate
  • Two piece, 304 stainless ball-valve for easy cleaning
  • Lid is designed to conveniently hang from a handle 
  • Stainless handles with stainless rivets for secure lifting
  • 1/2" NPT Male stainless steel plug and teflon tape included for thermometer port
  • Quick Disconnect Maximizer and thermometer
  • 19.69 inner diameter x 23.62 height

Other items you might want to order:

Powdered Brewery Wash (PBW) - 4 LB Can
Average rating:
average rating 100%
Speidel FE715 30 Liter (7.9 Gallon) Plastic Fermenter
Fermenter - Speidel 7.9 Gallon 30 Liter - HDPE Plastic
Out of Stock
Average rating:
average rating 80%
Jaybird False Bottom with for BrewBuilt BE352 10 Gallon Brew Kettle
False Bottom - Kettle - BrewBuilt NPT Port 10 Gallon
Options available. Click item.
Average rating:
average rating 100%
Pin It Bookmark and Share