Tri Clover Dip Tube 1.5 Inch Tube for Bru Gear Generation 1 Kettle
Tri Clover Dip Tube 1.5 Inch Tube for Bru Gear Generation 1 Kettle
Tri Clover Dip Tube 1.5 Inch Tube for Bru Gear Generation 1 Kettle Side View

Tri Clover - Bru Gear GEN 1 Dip Tube

Average rating:
average rating 93%
(3)
Tri Clover dip tube specifically designed for Generation 1 Bru Gear kettles
$32.99
SKU 2410-BruGearGen1
Qty

Tri Clover Dip Tube

1.5 TC x 1.5 TC x 0.5 OD Tube

Specifically Designed for Bru Gear Generation 1 Kettles

304 Stainless Steel

 

CHARACTERISTICS and SPECIFICATIONS:

         304 Stainless Steel

         Heavy duty, extra-thick tube is .5 outer diameter. Resists dents and bending.

         1.5 tri-clover connection on outside edge of tube

         1.5 tri-clover connection on middle section of tube

         Length between outer edges of facing tri-clover fittings is 1-5/8

         Tube length from center 1.5 tri-clover face to back of 90 degree bend is 2-1/8

         Tube height from back of 90 degree bend to end of tube is 2-1/16

         Over-all length is 3-3/4

Average rating:
average rating 93%
3 reviews

Featured positive reviews:

average rating 80%
I guess I can modify it to suit my needs. 07/11/2020
By Ace
After a short wait for the products to be manufactured, they were shipped and received quickly. Unfortunately I am not the original purchaser of the three BruGear 30 gallon vessels. I didn't know if I had Generation 1 or Generation 2 brew pots. After consulting BruGear by email including pictures I was told that they were Generation 1. Unfortunately the tubes will need to be modified because they are too long from the sanitary fittings to the bottom of the pots by about 1/8" to 3/16". I guess to long is better than too short. The engineering and part quality are pretty good so I would consider buying from Norcal again. The welds are better than so so, but it would be nice if they were on both sides of the parts instead of just on the contact sides. Allowing customer pictures in the reviews would really be a benefit for those reading the reviews.
average rating 100%
Not for the Gen2 Kettle 03/02/2016
By James Fisher
The tube is made well, nicely soldered, but unfortunately does not extend into the BruGear Gen 2 15 gallon kettle. I assume this is for the 1st generation kettle? The folks at Norcal were a pleasure to work with and are hand crafting me another one as we speak and will ship it at no extra charge. In hindsight, I should have asked if this was for the Gen 2 versus Gen 1. So, I'm giving 5 stars for customer service even though it was the wrong product.
average rating 100%
Excellent quality! 07/20/2016
By Blayne Cannon
Ordered this for use on a custom built boil tun. Standard size ordered. Extremely well made, perfect for the application as the pickup and works just as I'd hoped. Thanks!
 

Other items you might want to order:

Jaybird Tri Clover Tri Clamp 1.5 inch threaded filp-out hand bolt
Tri Clover - Clamp - 1.5"
$8.99
Qty
Average rating:
average rating 100%
1676_Tri_Clover_Gasket_1.5_Inch_Silicone.jpg
Tri Clover - Gasket - 1.5" - Silicone
$1.79
Qty
Average rating:
average rating 100%
1677_Tri_Clover_1.5_Inch_x_.5_Inch_Barbed.jpg
Tri Clover - 1.5" x 1/2" Barbed
$11.99
Qty
Average rating:
average rating 100%
1235_Tri-Clover_1.5-Inch_Cap.jpg
Tri Clover - Cap - 1.5"
$3.99
Qty
Average rating:
average rating 100%
Jaybird False Bottom with Handle, Hole, Integrated Stand, No Hinge
False Bottom - Kettle - Bru Gear - 15 Gallon 60 Quart
$151.99
Options available. Click item.
Pin It Bookmark and Share