False Bottom Stand - Level 2 Filtration
False Bottom Stand - Level 2 Filtration
False Bottom Stand - Level 2 Filtration 1

False Bottom Stand - Level 2 Filtration

Average rating:
average rating 100%
(2)
5" diameter false bottom stand and Level 2 Filter specifically designed for 15" Jaybird false bottoms.
$27.99
SKU 1200
Options added to this item:
Qty

 

Jaybird False Bottom Stand

Level 2 Filter

5" diameter false bottom stand specifically designed for 15" Jaybird false bottoms used with CONVERTED 15" DIAMETER KEGS.

Stand is 1-3/8" tall, and sits over the bottom of keg. Top of stand covered in same 304 stainless material as Jaybird false bottoms with dip tube hole drilled in center.

TWO USES IN ONE:

  • IN A MASH TUN: Supports the extra grain weight of those REALLY BIG beers! 2 LEVELS OF FILTRATION: Level 1: Helps prevent grain bits that fall through the outer edges of the false bottom from traveling to the center and clogging the dip tube. Level 2: Additional filtration screen under center part of false bottom and around dip tube.

  • IN A BOIL KETTLE: Since there isn't much solid weight above the false bottom you don't really need a stand. However, provides 2 LEVELS OF FILTRATION: Level 1: Helps prevent hop debris, fruit peels, and other adjuncts that fall through the outer edges of the false bottom from traveling to the center and clogging the dip tube. Level 2: Additional filtration screen under center part of false bottom and around dip tube.

IF YOU ARE BOTTOM DRAINING: You are not using a dip tube. Use the drop-down menu to select “no dip tube hole”.

Will not work with any other sized false bottom, because it would be too tall and the false bottom will not snuggle into the bottom curve of the keg properly.

 YouTube Video: The 4 different Jaybird
15" False Bottom Stands

Average rating:
average rating 100%
2 reviews

Featured positive reviews:

average rating 100%
Hops Filter 01/18/2017
By Evan Worthington
Using this on its own to set up a whole hop filter around the outlet on my bottom-draining keggle boiler. Worked flawlessly! I'd previously tried using stainless mesh but it clogged up and constricted flow, this was enough to set a filter and still pump through the plate chiller at about 3-4 gpm. I may still add a full false bottom but for now this does the trick.
average rating 100%
Great product 09/18/2015
By Ewell Henson
Great quality.
 

Other items you might want to order:

Pin It Bookmark and Share