Stainless Steel Sparge Diffusion Plate - 1/2 inch Male NPT connection. A simple and sturdy solution for sparging. Connect to tubing mounted above your mash. Popular with brewers using kettles from Spike Brewing, Blichmann Engineering, Ss Brewtech, BrewBuilt, Bru Gear, MoreBeer, MegaPot, Bayou Classic, and more!
Need a custom length? Use the pull-down menus to select a length range, then enter exact length (within that range) in the text box. We measure from the bottom of the sparge plate to the top of the stainless tubing.
(Third picture shows examples of items in the Sparge Plate family, which are not included).
3 reviews
Featured positive reviews:
Custom Part Quick
11/21/2019
By Ross Druckenmiller
I needed a custom setup based on my system and it was fabricated and arrived in Boston in under a week. They were responsive to emails to help me get the custom part I needed and even added in a piece of tube I needed but didn't order. Definitely my go to for any custom equipment needs.
Wort diffuser works
11/09/2021
By Mike Quebedeaux
I purchased this item to upgrade my Spike Solo for use with the “center pick up tube”. The system used a tube that went to the side of the basket and wort ran down the side. I felt that using the diffuser would more consistently rinse grain during the mash. It would be even better if it spun around. Cutting a few inches off the thick silicone tube from Spike allowed me to connect over the outside of the center pick up tube and on the other end connect the diffuser to the inside with a clamp. Brewed last weekend…. Everything worked great!
Sparge Diffusion Plate
03/08/2019
By Ken Lunde
WOW, no more grain bed disruption with returning wort. I can also keep my cooler closed now because I don't have to check to see if the returning wort is drilling a hole in my grain bed. My return is now thru the lid, and on the inside I can adjust the height so that is sits just on top of the grain bed.