Draw Tube - 1/2

Draw Tube - 1/2" Stainless Steel Draw Pipe

Average rating:
average rating 90%
Draw tube portion of dip tube. 304 stainless steel. 1/2" Diameter. Custom cut to your specifications
SKU 909
Specify size:
If modifying length or height, please specify custom size:

Custom built draw tube cut to fit your exact needs for any hot liquor tank, mash / lauter tun, or boil kettle application.

The draw tube is the pick-up tube part of a dip tube. It does NOT include compression fitting or attachment nut. If you need a dip tube, you can find it HERE.


  • 304 stainless steel
  • 1/2" outer diameter draw tube

In shopping cart, you will be asked to give the following measurements:

1) Distance (horizontal)

2) Distance (vertical)

Typically in a converted Sanke keg application (15.5 gallon and 50 liter kegs) the measurements will be close to the following:

  • Vertical measurement: 3-5/8"
  • Horizontal measurement:
    • Welded connection (coupling welded to OUTSIDE of keg): 7.5"
    • Weldless connection (bulkhead coupling is INSIDE of keg): 6"

If you feel comfortable cutting the dip tube yourself, you can specify a slightly larger size than you need, then cut it down (using a hack saw) to fit your application.

Average rating:
average rating 90%
2 reviews

Featured positive reviews:

average rating 100%
Great job 07/15/2013
By shawn denton
The custom dip tube was perfect! Quality dimensions, everything... drains my kettle to the very bottom.
average rating 80%
draw tube 08/20/2013
By william russ
work just fine
Pin It Bookmark and Share