Stainless Steel 5 or 10 gallon weldless picnic cooler spigot with ball valve open
Stainless Steel 5 or 10 gallon weldless picnic cooler spigot with ball valve open
Stainless Steel 5 or 10 gallon weldless picnic cooler spigot with ball valve open
Stainless Steel weldless picnic cooler spigot with ball valve exploded diagram
Stainless Steel weldless picnic cooler spigot with ball valve assembly instructions

Weldless - Stainless Steel Cooler Spigot Kit

gray stars
Replaces standard push-button spigot on a 5 or 10 gallon picnic cooler.
$34.99
SKU 475
Qty

Replace the standard push-button spigot on a 5 or 10 gallon picnic cooler with this ball valve.

No modifications to the cooler are necessary - simply remove the old spigot, install the kit in the stock hole, and tighten the coupler inside of cooler.

Allows you to use cooler as a mash lauter tun (MLT) or hot liquor tank (HLT).

1/2" outlet barb is perfect for directly attaching tubing to perform transfers.

Ball-Valve and all hardware is made from 304 stainless steel and sealing o-ring is made from high-temp (500 degrees F) food-grade silicone.

Other items you might want to order:

0396_Half_Inch_Silicone_Tubing.jpg
Tubing - 1/2 ID Hi-Temp Silicone - Foot
$3.99
Qty
Average rating:
average rating 100%
Pin It Bookmark and Share