Tri Clover Fermenter Blow-Off Tube
1.5" TC x 10” Long x 1/2" Diameter
304 Stainless Steel
So you have that nice, shiny conical fermenter. You just brewed a batch of beer, and you set up a blow-off tube attached to the top of your fermenter, terminating into a jar filled with sanitized water.
Everything looks great… you go to bed.
You check on your baby the next morning only to find that the blow-off hose crimped upon itself. Your wort is fermenting, but back pressure has formed behind the crimp.
Dang it! If only there was a way to keep that from happening!
NorCal Brewing Solutions to the rescue!
Our fermenter blow-off tube replaces soft hose with a METAL arm that clamps to the top of your fermenter with a Tri Clover clamp. The entire arm is made of 304 stainless steel extending all the way past the edge of your fermenter.
Simply attach an inexpensive 1/2" inner diameter hose (plain vinyl works fine) and drop it the hose straight down into your sanitized water jar.
Since your hose now falls straight up and down vertically, there is NO WAY IT CAN CRIMP ITSELF!
CHARACTERISTICS and SPECIFICATIONS:
· All components are 304 Stainless Steel
· Over-all Height is 3.6 inches
· Length of tube (from outside edge of 90 degree angle to outside edge of 90 degree angle) is 9.25 inches
· Over-all Length is 10 inches
· Tube is .5” outer diameter, accepts any type of .5” inner diameter blow-off hose
· Tri-clover connection on fermenter connection end attaches with 1.5” tri clover clamp (sold separately) and gasket (sold separately)