Pass Through Stainless Steel Racking Cane - Liquid Ball Lock connect. Height adjustable using 1/2" NPT Pass Through Compression (included)
Adjustable Racking Cane
Liquid Ball Lock Connect x 1/2" Male NPT Compression
1/2" Outer Diameter – 304 Stainless Steel
This is the racking cane that is an optional upgrade to our line of Sanke Keg “Tee” and “Cross” fermenter kits, Speidel, glass and PET carboy transfer tools, and Speidel CO2 Transfer System (see “Other items you might want to order, below).
Stainless steel racking cane accepts standard “barbed” (SKU# 131 – sold separately) or “flared” (SKU# 133 – sold separately) Ball Locks.
Compression fitting is standard half inch NPT Male, and threads into a wide range of NorCal Brewing Solutions products. This allows for creative racking solutions integrated with blow-off tubes, transfer systems, etc. (see “Other items you might want to order, below).
Over-all length is 29 inches from bottom of tube to back of curve. Need a shorter or longer cane? Use the pull-down menus to customize length to your specification, then enter exact length (from bottom of tube to back of curve) in the text box.
ONE COMPRESSION FITTING and 3 INSERT TYPES included:
1. Stainless Ferrule Set – SKU# 3287 (pre-installed inside compression fitting) – Allow you to LOCK the fitting in a fixed place on the racking cane.
2. Delrin Compression Sleeve – SKU# 0034 – Made of nylon. Swap out the Stainless Ferrule Set for the Delrin Sleeve to be able to slide the racking cane up and down through the fitting. Allows use of cane with fuel, gas, methanol and ethanol.
3. High Temp Silicone O-Rings – SKU# 0111 – Quantity of 2 supplied – Swap out the Stainless Ferrule Set for the O-Ring (use only 1 at a time – save the other one for backup) to be able to slide the racking cane up and down through the fitting. Great for high temperature racking transfers.
CHARACTERISTICS and SPECIFICATIONS:
· All metal components are 304 Stainless Steel
· Over-all length is 29 inches. Tube is .5” outer diameter
· Compression fitting is 1/2" NPT Male connection
· One cane, one compression fitting, 3 compression fitting insert types included